Lordstown Motors, the fledgling electric vehicle company that purchased General Motors’ Lordstown Assembly plant from it last year, has announced it will soon go public on the NASDAQ stock exchange under the ticker ‘RIDE’.
Lordstown Motors has spent much of 2020 trying to raise enough capital in order for it to begin building its new electric pickup truck, the Endurance, at the former GM assembly plant. Company CEO Steve Burns said previously that he needs to raise around $450 million in order to start production of the Endurance and fulfill the orders it has already received for the truck and the IPO seems like the solution he’s been looking for, with the deal set to line Lordstown Motors’ pockets with an additional $675 million.
GM is also investing around $75 million in the transaction, however only $25 million of this contribution will be in cash, according to The Verge. The remaining $50 million comes in the way of plant assets and permits given to Lordstown Motors, along with covered plant operating costs since the automaker moved into the 6.2 million sq. ft. facility late last year. This contribution also ensures GM will get a place on Lordstown Motors’ board of directors.
Furthermore, it has been revealed that GM is connecting Lordstown Motors with its Tier 1 supply chain – giving the company access to a variety of GM components. This explains why the early pre-production Lordstown Endurance pickup trucks have been seen with components that look suspiciously like GM pieces, such as the CornerStep rear bumper from the previous-generation line of GM full-size trucks.
Lordstown Motors will list on the NASDAQ after it enters a partnership with an acquisition company that already has shares trading on the stock exchange. This deal is expected to close in the fourth-quarter of this year.
Lordstown Motors is hoping to have the Endurance in production by early next year. The battery-electric truck has four in-wheel hub motors and will boast a real-world range of around 250 miles. It will also have a maximum towing capacity of 7,500 lbs and will be electronically limited to 80 mph. Prices for the pickup, which is mainly marketed toward fleet buyers, will start at $52,500 for the entry-level model.
GM has not yet released an official statement with regard to its investment into Lordstown Motors.
Subscribe to GM Authority for more GM Lordstown news and around-the-clock GM news coverage.
Extra comfort for rear-seated passengers.
Filings made in 24 countries, so far.
The sweepstakes closes on December 22nd and the drawing will take place on December 28th.
At a time of year when luxury car ATP usually rises.
Sales decreased 5.6 percent to 16,670 units during the first ten months of 2024.
Specifically critical minerals supply chain development.
View Comments
»four in-wheel hub motors« that makes it special.
No need for mechanical Locking differential, since each motor can be controlled by a central electronic system, putting torque to each wheel as needed at any moment in time depending on the conditions at each individual wheel.
Who is producing these hub motors?
The electric hub motors come from Elaphe Propulsion Technology, Ljubljana (formerly known in German as Laibach): in-wheel dot come.
Another supplier of hub motors is the japanese company Nidec, rather known for their motors for computer hard drives. PSA formed a JV with Nidec a year ot two ago for the common development of ekectric motors for cars.
Oh wow, I live in Ljubljana. That is an interesting information. Thanks Man!
Heavier wheel hubs with a motor inside may affect driving stability due to that weight. I prefer what was done for the Mustang Mach-E 1400, which has seven "pancake" or flat motors, and uses normal hubs and wheels. It has 1400 HP all on electric power. Search the Ford Authority pages.
In principle, the hub motor increases the unsprung mass, which is a bad thing.
The speed of this car is limited to 80 miles/h (130 km/h), which is beyond the speed limit on US motorways, last time I checked. So this limits he disadvantage. But sure one will have excellent torque vectoring. Speed is not important for a work horse. Constructing any machine means always to find a compromise of several development goals. "Two out of three aint bad".
On Yutube one can see videos by Elaphe, the developer of the hub motors, one with cars going fast over very rough terrain on a test track.
I recommend to wait and see and judge he vehicle when it actually hits the road.
I抦 not that much of a online reader to be honest but your blogs really nice, keep it up! I'll go ahead and bookmark your site to come back later. Many thanks